0 Product(s) in cart |
Total £0.00 |
Login Status  
Not logged in
  » Login

High Temperature Grease, Global Deicer Parts, HiTempGrease

Airfield Safety Solutions

Product Categories


Airport GSE Products

 Checkout
High Temperature Grease
High Temperature Grease
Price: £25.00
Quantity:

OKS 404

High Performance and

High Temperature

Grease

OKS 404 - Product Information

Fields of Application:

Lubrication of plain, roller and pivoting bearings, splined shafts, threaded spindles

and sliding surfaces of all kinds under high loads and a wide temperature range, as

well as all sliding speeds permissible for grease lubrication.

Advantages and Benefits:

Fewer downtimes and repairs as a result of considerably reduced wearing. Supports

sealing of bearings and corrosion protection.

Application:

For best results clean the lubricating point carefully, e.g. with OKS 2610/OKS 2611

Universal Cleaner. Remove the corrosion protection ahead of the initial filling. Fill the

bearings in a way that all the functional surfaces for sure get the grease. Slow

moving bearings(DN-value < 50.000) should be filled completely, normal moving

bearings should be filled to 1/3 of the free inner housing space. Observe the

instructions of the bearing or machine manufacturer. Relubrication with a grease gun

on to the grease nipples or with an automatic lubrication system. Relubrication

intervals and amount to be defined acc. to the service conditions. If the removal of

the old grease is not possible the amount of grease has to be limited to avoid excess

lubrication of the bearing. At longer relubrication intervals a complete exchange of

the old grease is recommended. Only mix with appropriate lubricants. For additional

questions please contact our Technical Department.

Additional Information:

Packaging (Article number):

- 400 g Cartridge (00404019)

- 1 kg Tin (00404034)

- 5 kg Hobbock (00404050)

- 25 kg Hobbock (00404062)

- 180 kg Drum (00404070)

Version

E-04.1/05

The data in this brochure are the result of extensive testing and experience and meet the latest stage of engineering.

Due to the diversity of application possibilities and technical realities they can only be recommendations and are not

arbitratily transferable; thus no obligations, liability or warranty claims can be derived herefrom. We accept liability for the

fitness of our products for particular purposes and accept such liability in writing in the individual case. In any event any

justified warranty claims shall be limited to the delivery of replacement goods which are free from defect or, in the event

that such subsequent improvement fails, to reimburesement of the purchase price. Any and all further claims, in

particular but without limitation any liability for consequent damage, shall be excluded. Prior to use own testing must be

done to prove suitability. The data are subject to change for the sake of technical progress. ® = Registered Trademark

Technical Data

OKS 404

High Performance and High Temperature Grease

Norm Conditions Unit Value

Classification DIN 51 502 DIN 51 825 KP2P-30

Base Oil

Type Mineral oil, Polyalphaolefin

Viscosity DIN 51 562-1 +40°C mm²/s 100

Flash point DIN ISO 2592 > 79 °C > 200

Thickener

Type Lithium-complex soap

Consistency DIN 51 818 DIN ISO 2137 NLGI- class 2

Worked

penetration DIN ISO 2137 60 DH 0,1 mm 265 - 295

Flow

pressure DIN 51 805 -30°C mbar < 1.400

Drop point DIN ISO 2176 °C > 260

Oxidation

resistance DIN 51 808 100h/100°C bar < 0,3

Application Data

Density DIN EN ISO 3838 +20°C g/cm³ 0,93

Colour light-coloured

Service Temperatures

Minimum

service

temperature

DIN 51 805 < 1.400 hPa °C -30

Upper service

temperature DIN 51 821-2 F

 

 

50 (A/1500/600), 100h °C 150

Maximum

service

temperature

°C 200

DN- value mm min 350.000

Water

resistance DIN 51 807-1 +90°C Grade 1-3 1 - 90

Corrosion protection tests

SKFEMCOR

DIN 51 802 Corr.-Grad 1-5 0 and 0

SKFEMCOR,

on

copper

DIN 51 811 24h/100°C Corr.-Grad 1-5 1 - 150

Mechanical / dynamic tests

FAG FE 9 DIN 51 821-1 1500/6000-150 h > 100

Wear protection tests

VBT- weld

load (Four

ball test rig)

DIN 51 350-4 N 2.800

VBT- wear DIN 51 350-5 1.420 U/min/1 h/800 N mm < 0,8

The data in this brochure are the result of extensive testing and experience and meet the latest stage of engineering.

Due to the diversity of application possibilities and technical realities they can only be recommendations and are not

arbitratily transferable; thus no obligations, liability or warranty claims can be derived herefrom. We accept liability for the

fitness of our products for particular purposes and accept such liability in writing in the individual case. In any event any

justified warranty claims shall be limited to the delivery of replacement goods which are free from defect or, in the event

that such subsequent improvement fails, to reimburesement of the purchase price. Any and all further claims, in

particular but without limitation any liability for consequent damage, shall be excluded. Prior to use own testing must be

done to prove suitability. The data are subject to change for the sake of technical progress. ® = Registered Trademark